Cut & Paste

ChrisThrift · 16th January 2013, 09:49 PM

In the loadings, if I want to repeat the loading for another beam and use the cut & paste keys it only works on the second beam listed and not the first beam. Why? and how do I cure the problem

Tony Bryer · 21st January 2013, 03:56 AM

Thanks, known issue which is fixed in the latest releases of SuperBeam and ProSteel, 4.58h and 5.42h respectively.

16th January 2013, 09:49 PM	#1
ChrisThrift Member Join Date: Jan 2013 Posts: 1	Cut & Paste In the loadings, if I want to repeat the loading for another beam and use the cut & paste keys it only works on the second beam listed and not the first beam. Why? and how do I cure the problem

21st January 2013, 03:56 AM	#2
Tony Bryer Administrator Join Date: Apr 2008 Location: Melbourne, Australia Posts: 822	Re: Cut & Paste Thanks, known issue which is fixed in the latest releases of SuperBeam and ProSteel, 4.58h and 5.42h respectively. __________________ Tony Bryer, Greentram Software Pty Ltd

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode