Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > SuperBeam > Support

Support Technical and other questions related to the use of SuperBeam

Reply
 
Thread Tools Display Modes
Old 17th March 2009, 10:59 AM   #1
mikeyb50
Member
 
Join Date: Aug 2008
Posts: 19
Default Adding steel colums to support beams

How do you add a steel column at both ends of a beams points R1 and R2 instead of the usual bearing additions
mikeyb50 is offline   Reply With Quote
Old 17th March 2009, 11:20 AM   #2
Tony Bryer
Administrator
 
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 829
Default Re: Adding steel colums to support beams

You add the two columns in as separate items. Their position in the Project Manager list must be somewhere below the beam. You can enter each reaction using the B/F facility within the column load edit dialog. Generally the simplest detailing is to support the beam on cap plates, i.e. a plate welded to the cut end of the column. With a cap plate give the load a position of 1,2,3 or 4 as per the diagram and an offset of 0. This denotes that the load is being taken as acting at the face of the column, generating a moment of load x column depth/2.
__________________
Tony Bryer, Greentram Software Pty Ltd
Tony Bryer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT. The time now is 12:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia