Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > SuperBeam > User feedback and requests

User feedback and requests User comments on SuperBeam and requests for future enhancements

Reply
 
Thread Tools Display Modes
Old 15th December 2008, 09:37 PM   #1
Nick Jackson
Member
 
Join Date: Dec 2008
Posts: 22
Default Padstones under Timber Beams and Timber Bearers

Dear Tony

Timber beams frequently require padstones, especially large oak sections in stone rubble walls. (I do a lot of these)

Currently I can only calculate a padstone or bearer for a timber beam by switching to a steel beam and then cutting and pasting the bearing deatils from the design window.

It really would be of great benefit to be able to determine the required padstone for a timber beam.

I would also like to see the addition of a timber bearer option to compliment padstones. Here the bearing calculations would include compression perp to the grain of the bearer.

I would like to be able to specify a timber bearer for a steel beam as well as for a timber beam. Again, this is a detail that frequently crops up in my work. For example, a steel beam in line with joists in a ceiling requires a padstone to spread the load in a stone rubble wall. The padstone is exposed spoiling the effect of the neatly pointed stonework. Using an oak bearer is far more visually appealing.

This thread of thought extends to the bearings under a beam. Currently you do not check bearing stress in the beam. For example, reaction R1 = 10kN and bearing area is 100 x 30mm, bearing stress is 3.33N/mm2 which would be way over the top for most timbers. Users could be asked to enter the length of the bearing or the program could state a minimum bearing length.

I know that a competent engineer will always address these issues but I can't help feeling that aside from the extra work appending your reports manually, it all looks a bit messy in the document.

Kind regards

Nick
Nick Jackson is offline   Reply With Quote
Old 15th April 2009, 04:54 PM   #2
Nick Jackson
Member
 
Join Date: Dec 2008
Posts: 22
Default Re: Padstones under Timber Beams and Timber Bearers

Hi Tony,

As per my comments for the glulam, I am really grateful for this feature and your implemenation is very slick.

Thanks

Nick J
Nick Jackson is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT. The time now is 04:32 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia