Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > ProSteel > Support

Support Technical and other questions related to the use of ProSteel

Reply
 
Thread Tools Display Modes
Old 8th July 2016, 06:40 AM   #1
Robert Rowley
Member
 
Join Date: Nov 2008
Posts: 19
Question Live & Dead load Factors (PS 7)

How do I set up these factors, if I open an old or make a new file, the factor of safety is not added.
Is this intended?
Robert Rowley is offline   Reply With Quote
Old 8th July 2016, 11:27 AM   #2
Tony Bryer
Administrator
 
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 780
Default Re: Live & Dead load Factors (PS 7)

Yes, the factoring is done automatically. You see this in the numbers printed immediately below the beam loads, e.g.

Code:
Unfactored reactions (kN)  Total:	 ̅4̅0̅.̅0̅0̅	 ̅4̅0̅.̅0̅0̅
	Dead:                            20.00   20.00
	Live:                            20.00   20.00
	Factored reactions:              60.00   60.00

Total load: 80.00/120.00 kN  Unfactored/Factored
Total dead load is 40kN, live load 40kN. When factored this becomes 40 x 1.4 + 40 x 1.6 = 120kN, Likewise reactions, 20 x 1.4 + 20 x 1.6 = 60kN.
__________________
Tony Bryer, Greentram Software Pty Ltd
Tony Bryer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT. The time now is 05:48 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia