Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > ProSteel > Support

Support Technical and other questions related to the use of ProSteel

Reply
 
Thread Tools Display Modes
Old 25th May 2017, 02:12 PM   #1
Chris Kenefick
Senior Member
 
Join Date: Sep 2008
Posts: 30
Default Lateral frame

I'm after some help here, we do a lot of domestic extensions were the clients request that the rear of the house is removed at lower level to open up the existing dwelling into the extension, normally we leave at least 1/3rd of the masonry retained to conform with Approved Document A - there's a significant number that are now asking for the whole of the rear to be removed.

My understanding is that there would be a need for 'lateral frame' to be installed to allow this, which would in essence leave two small columns to the ends of the inserted beam[s] is there anyone that knows of a way to do this to leave a flush finish IE. remove the columns to allow flush finishing of Kitchen units etc., ???

Thanks in anticipation
Chris Kenefick is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT. The time now is 01:36 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia