Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > EuroBeam > Support

Support Technical and other questions related to the use of EuroBeam

Reply
 
Thread Tools Display Modes
Old 27th November 2017, 11:37 AM   #1
a1winchester
Member
 
Join Date: Apr 2013
Location: Lincolnshire
Posts: 7
Default Unequal Support reactions for symmetrical beam load

I have a steel lintel which supports only symmetrical permanent loads.
The loading pattern comprises of self weight, a full UDL and two partial varying intensity loads.
The Eurobeam analysis gives equal unfactored support reactions as expected, but the 6.10a support reactions are unequal. The R1 factored reaction seems correct at 1.35 x the unfactored reaction, but R2 is giving a result which is 1.025 x the unfactored reaction.

The padstone calculation is using this lower reaction to size the padstone.

Explanations on 20 notes sent to...
a1winchester is offline   Reply With Quote
Reply

Tags
load factors, padstones, support reactions

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT. The time now is 12:20 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia