![]() |
|
User feedback and requests User comments on EuroBeam and requests for future enhancements |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Oct 2018
Posts: 7
|
![]()
Could you get a sponsored plug in for lintel manufacturers so lintels can be loaded and then sized?
Alternatively when selecting "loading only" the output could have a summary of total kN and kN/m (factored and UF) one of those 3 is how the lintel suppliers show their load span tables. |
![]() |
![]() |
![]() |
#2 |
Administrator
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 901
|
![]()
You can do this already using the scripting option if you have the lintel SWL figures. Have you checked out the Catnic box lintel option - it should be listed in the standard notes dropdown. http://www.superbeam.co.uk/script_generated_output.htm may help: a bit of programming experience probably helps.
__________________
Tony Bryer, Greentram Software Pty Ltd |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|