Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > ProSteel > Support

Support Technical and other questions related to the use of ProSteel

Reply
 
Thread Tools Display Modes
Old 7th January 2018, 09:39 AM   #1
Robert Rowley
Member
 
Join Date: Nov 2008
Posts: 21
Default Bolt top distance on Fin Plate

Tony,

Could you please explain why when I try to use a 90 x 90 x 8 mm fin plate connection with 2 no M16 bolts at 40 mm vertical centres the calculation cannot be run and the stated reason is

"bolt top distance, e1 (25 mm) is less than 1.25d (20 mm)"

M12 (Smaller bolts) do not have capacity.

Bob
Robert Rowley is offline   Reply With Quote
Old 18th January 2018, 11:11 AM   #2
Tony Bryer
Administrator
 
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 809
Default Re: Bolt top distance on Fin Plate

Hi Bob

Thanks for the report. For fin plate connections designed using the 'Green Book' [SCI P212] - used as the basis for ProSteel connection calcs - the minimum bolt end and edge distances are 2.0d (6.3 p.153) and this is what is checked inside the program. Unfortunately if this check fails, the wrong error message is shown as per your report. This will be fixed in the next release. To make the calculation comply you will need to increase the plate length or reduce the bolt spacing, assuming that your connection geometry allows this.
__________________
Tony Bryer, Greentram Software Pty Ltd
Tony Bryer is offline   Reply With Quote
Old 20th February 2018, 04:15 AM   #3
Tony Bryer
Administrator
 
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 809
Default Re: Bolt top distance on Fin Plate

This is fixed in release 7.05b, available via the Misc, Check Website for Updates option
__________________
Tony Bryer, Greentram Software Pty Ltd
Tony Bryer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia