![]() |
|
Support Technical and other questions related to the use of ProSteel |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Apr 2011
Posts: 45
|
![]()
Hi Tony
I have installed the latest update and the loadings page has gone a bit funny Where in the beam loadings you put the U R etc there is a 1 which is over written by the U or the R etc - the load D and L is OK but in the load description I can only type one letter and this is underlined but if I tab onto the loadings then tab back I can type in the full description floor, roof etc Just wondered if it was me or whether anyone else has found this regards John |
![]() |
![]() |
![]() |
#2 |
Administrator
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 832
|
![]()
I can confirm this - thanks for the report. It appears that something has changed within the bought-in grid component that we use but so far I've not been able to identify the problem. The Check for Updates will offer you a reversion to 7.05c if that's what you want to do, otherwise, as you describe, the workaround is possibly having to type some data entries twice.
__________________
Tony Bryer, Greentram Software Pty Ltd |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Apr 2011
Posts: 45
|
![]()
Hi Tony
also with the stanchion design when I put in the dead and live loads and tab across it knocks out the dead load - this sometimes does it when you bring a reaction forward as well maybe the same problem ? regards John |
![]() |
![]() |
![]() |
#4 |
Administrator
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 832
|
![]()
These issues are now (hopefully) fixed in 7.05e, available for download via your current copy's Check Website for Updates option
__________________
Tony Bryer, Greentram Software Pty Ltd |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|