Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > SuperBeam > Support

Support Technical and other questions related to the use of SuperBeam

Reply
 
Thread Tools Display Modes
Old 6th October 2009, 12:19 PM   #1
chrisbarber
Member
 
Join Date: Oct 2009
Posts: 1
Default Flitch beam Length

Hi,
I am new to this forum and have had superbeam for a couple of years now. What i was wondering is if it was possible to specify a flitch length rather than it being the length of the timer by default. E.g. timber beam 3m long flitch to be 2m through the c/c.
Thanks
Chris
chrisbarber is offline   Reply With Quote
Old 7th October 2009, 12:00 PM   #2
Tony Bryer
Administrator
 
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 796
Default Re: Flitch beam Length

No, this sort of flitch beam cannot be checked using SuperBeam. For an authoritative consideration of this sort of beam see Flitch beams with short length steel plates, by Dr Satish Desai in the Structural Engineer 18 June 2002. In the example beam considered in the article, using a short plate instead of a full-length one reduced the load capacity of the considered beam by 58%.
__________________
Tony Bryer, Greentram Software Pty Ltd
Tony Bryer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia