Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > ProSteel > Support

Support Technical and other questions related to the use of ProSteel

Thread Tools Display Modes
Old 17th October 2019, 10:44 AM   #1
Join Date: Nov 2014
Posts: 3
Default Editing 'Notes'

Hi, I added a note in the notes panel at the bottom of the beam loading box. I later returned to the panel to edit the note but the note was not present in the box. So I added my revised note, thinking it would over-ride the previous note, but it didn't - I now have two notes. Curiously, the original note is added just below the load summary - just before the beam size - the other is added in a different place - right at the end of the page. When I now return to the notes box only the second note is present and editable. How can I get back to the original note to edit/delete it? Thanks.
Jeds is offline   Reply With Quote
Old 22nd October 2019, 06:30 AM   #2
Tony Bryer
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 916
Default Re: Editing 'Notes'

Any notes added on the Loads page are printed between the loads and the steel, timber or RC calculation. Typically such notes would relate to the loads used. The notes entered on the steel, timber, RC page get printed at the end of the calculation.
Tony Bryer, Greentram Software Pty Ltd
Tony Bryer is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

All times are GMT. The time now is 10:52 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia