Greentram Software Support Forums  

Go Back   Greentram Software Support Forums > ProSteel > Support

Support Technical and other questions related to the use of ProSteel

Thread Tools Display Modes
Old 22nd August 2018, 09:13 PM   #1
New member
Join Date: Aug 2018
Posts: 1
Default Web-bearing query

I have downloaded the demo version of Pro-steel and am using it to aid with my engineering studdies. It looks like a fantastic software but i have one issue: Upon entering the external loads, the software dosn't appear to produce the minimum required stiff-bearing length (b1) - it just displays zero. Also it is showing the bearing capacity as 63kn on a 305x165x40 section and dosn't show what bearing length this is calculated on.

I Would be garteful for some clarification.

Thankyou in advance.
Iqbal7 is offline   Reply With Quote
Old 23rd August 2018, 06:37 AM   #2
Tony Bryer
Join Date: Apr 2008
Location: Melbourne, Australia
Posts: 916
Default Re: Web-bearing query

The stiff bearing length figure is the minimum bearing required if web stiffeners are not provided. A figure of 0 means that web stiffeners are not required.
Tony Bryer, Greentram Software Pty Ltd
Tony Bryer is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

All times are GMT. The time now is 10:36 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2011 Greentram Software Pty Ltd, Melbourne, Australia